In your quest for a potable executive car, likely, the Infiniti Q50 may not be your best choice. However, the car is an ideal fit when it comes to cars that are very powerful and have a spacious interior. It is also quite affordable.
The car also has its share of users and also its share of challenges.
Therefore, it comes as no surprise when questions like; Where is the TPMS reset button on Infiniti Q50? pop up occasionally. This question is mostly asked by Infiniti Q50 owners who want to reset the car’s flat tire warning when it comes up.
In this article, you will become informed on where to find the TMPS reset button on your Infiniti Q50 as well as how to reset the flat tire warning on your Infiniti Q50.
Brief Story About Infiniti Q50
Nissan is the manufacturer of the Q50, a tiny premium vehicle. The car was released in 2013 under the name Infiniti, which is their luxury brand, and it served as a replacement for the Infiniti G37.
It was also one of the first of their models to receive the new model number, which consisted of a Q followed by two numbers.
Models from 2018 and beyond are considered the greatest because they have the most recent and state-of-the-art technology as well as advanced safety features.
The Q50 is available in rear and all-wheel-drive configurations, and when combined with a V6 engine and a seven-speed automatic transmission, provides drivers with the best speed and reliability.
What is TPMS?
One has to understand what the acronym TPMS means. TPMS stands for Tire pressure monitoring system. The function of the TPMS is to warn you if your tire pressure is dangerously low and could lead to hazardous driving conditions.
If the warning light is on, it indicates that your tires may not have the proper amount of air in them, which can result in excessive wear of the tire and even tire failure.
Also, Tire pressure monitoring systems (TPMS) are classified into two types: direct and indirect.
Each tire pressure system monitors tire pressure within each tire and informs the driver if tire pressure is low (25 percent or more below or above recommended inflation pressure); however, the two systems monitor that pressure in two different methods.
In the United States, direct TPMS is more commonly employed. The sensors are either installed in the tire pressure valve, which serves as an antenna or wrapped around the wheel rim using a band clamp.
These devices communicate data to an onboard computer. However, in harsh weather conditions, these devices can throw off the balance of a tire and corrode.
indirect TPMS is more commonly used in Europe. The sensors are housed within the ABS braking system and/or the wheel speed sensors.
They monitor the speed of the wheel revolutions for any changes because underinflated tires are smaller and rotate faster.
Although they have no effect on tire balance and do not corrode, they must be reset with a scanning tool whenever tires are replaced or rotated.
What To Do When The TPMS Comes On
If the system senses a decline in tire pressure, the flat tire warning light will be displayed on your dashboard.
You must pull over as soon as this light appears on your dashboard and inspect your tires for any punctures or deflation; Never dismiss this signal as a maintenance reminder, as this might lead to unsafe driving conditions.
Driving with a flat tire is not only unsafe, but it can also cause additional internal structural damage to the tire, resulting in poor handling and control, accidents, as well as damage to the rims and suspension.
Where To Find The TPMS Reset Button On Infiniti Q50
Here are the steps that you should follow in your quest to find your TPMS reset button on your Infiniti Q50 and reset it.
However, before you proceed, you must determine the TPMS system type
If the tire pressure sensors on your Infiniti Q50 are equipped with a direct system, resetting them might be as easy as pressing a reset button on the dashboard or going through the steps in the manual to go through a menu.
If the Infiniti Q50 has an indirect system, the system needs to be reset using a magnet or scanning equipment, which may either be done by a dealer or the owner of the car.
Also, some cars have a glove compartment that has a reset button. This button has to be pressed for three seconds while the engine is running. Find more steps that should be followed below.
Turn the ignition key to start the engine without fully starting it
If your Q50 has a Smart Key Button, push the start button twice without touching the brake pedal.
Press the Menu button
The Menu button on your center console is located in the bottom row under your screen panel.
Go to the Settings Menu
Navigate to the Settings Menu on the car’s touchscreen.
Some selections will display on the screen; choose ‘meter’.
A new menu will display, choose Tire. After the choice has been made, you may create reminders for certain intervals and reset the one that is currently shown in your vehicle.
One Infiniti Q50 Option To Look Out For
The Infiniti Q50 has a Tire Maintenance feature which is available on models from 2014 to 2021.
This feature is activated when the driver specifies a distance for tire replacement. This tool ensures that can rest and set a reminder for a specified distance.
One precaution to take is to check your vehicle’s tires regularly, especially before long trips. Meanwhile, the aforementioned process can be carried out by the owner of the Q50 or at any garage where it has recently undergone maintenance.
Meanwhile, the question; Where is the TPMS reset button on Infiniti Q50? Has been answered in this article. We also went one better to show you the process of resetting the TPMS on your Infiniti Q50.
The positive is that resetting the tire pressure alert on your dashboard is not complicated and easy to carry out. We’ve provided you with information on the direct and indirect types of TPMS and where they are mostly used.
Do well to leverage the contents of this article in your quest to reset the flat tire warning on your Infiniti Q50 without any complications.