2016 Kia Sedona Climate Control Assembly

2016 Kia Sedona Climate Control Assembly

The 2016 KIA Sedona climate control assembly is tasked with controlling the interior flow of the car air conditioner. Climate control is capable of keeping occupants cool in summer and warm in winter. The engine control module (ECM) is made up of the heating, ventilation, and air conditioning (HVAC) module.

The HVAC is designed to accept signals from different sensors in the car that helps it regulate the car temperature. It also monitors the speed, sunlight intensity, and barometric which helps it control the airflow. 

READ: Mazda 5 Hatch Leak (Guide)

2016 Kia Sedona Climate Control Problems

If your car is affected by a climate control problem. It is one of the most frustrating events to happen to 2016 KIA owners. We have gathered some reasons why your 2016 Kia developed the climate control problem.

Electrical system malfunction in the car can alter the climate control system. Even a fault with your car door can alter the system. If you’re currently facing a climate control problem with your car. Follow the steps below to troubleshoot your car.

  • Inspect the fuses in your car to spot any blown fuse.
  • Secondly, inspect your car wiring, and plugs, and check for corrosion.
  • These are the most reported causes of climate control problems.

2016 Kia Sedona: A closer look at the climate control assembly

2016 KIA is one of the cars to have a cool ride due to its climate control assembly. You can regulate your car temperature with the system to keep the temperature fit for your health.

Before I proceed, let’s look at the makeup of the 2016 Kia Sedona Climate Control Assembly. The climate control assembly has in it an evaporator, blower motor, condenser, and resistor. The liquid gas is converted by the condenser to a refrigerant. And also regulating the system pressure levels that cool the airflow.

READ: How much Platinum is in a Catalytic Converter?

 What can I do to prevent this from happening?

You can prevent the 2016 Kia Sedona Climate Control Assembly from developing faults in a few ways. When your car climate control system is filthy. You should use a vacuum cleaner or compressed air to clean the dirt. Using soap or detergent with water, it seeps into the control panel.

This can damage the system. Also, don’t place anything on top of the 2016 Kia Sedona Climate Control Assembly. Any placement on the top will block the ventilation slots which can cause a fault in the system.

How to Install a 2016 Kia Sedona Climate Control Assembly

To install the climate control assembly, remove the lower dash trim panel. You can do this by pressing the release tabs on the sides.

There are two clips at the top of the panel to be lifted. Lift the clips and loosen them beneath them before pulling them out from the bottom edge. Place them in a safer place with other things you loose from the system.

Next, you have to remove the upper dashboard trim panel by gently prying the edges near the clips. As you’re prying the edges, keep pulling up the bottom edge to remove it. Now remove it from the clips and set them aside. 

READ: Chrysler Check Engine Light – Causes & Fix

2016 Kia Sedona’s Climate Control Assembly AC’s Compressor?

As mentioned earlier, the AC compressor pumps refrigerant through the climate control assembly. And secondly, it creates pressure for the optimum performance of the refrigerant. These activities are vital to creating cold air in the car. The compressor derives power from the drive belt or called belts.

On some cars like the 2016 Kia Sedona, the AC compressor is controlled with the compressor clutch. The compressor clutch is put to work when you use the climate control buttons.

Car AC elements do wear and tear as their usage years grow. So, the AC compressor is prone to wear out faster in your 2016 Kia Sedona. The reason behind this is a leak from the refrigerant which will lead to lowlevel lubrication of the AC Compressor. This is why it usually fails.

READ: What Does No Engine Brake Mean?

Symptoms of a failing AC Compressor in 2016 Kia Sedona

Warm air conditioning

Since the 2016 Kia Sedona climate control assembly is there to offer you cold or hot hair depending on your choice. The assembled can malfunction and produce hot air when you request cold air. This can happen as the assembly AC compressor wears out.

Rattling noise

You will experience rattling noise from the climate control assembly installation area. The sound can also be from the engine area to other parts of the car. The more the climate control assembly produces noise in your car, the more the AC compressor gets bad. This can be because the AC compressor is loose or has grown weak and need mechanical attention.

How urgent is an AC Compressor replacement?

2016 Kia Sedona climate control assembly is an important aspect of the car. And it’s important to keep it fit at all times. Since this involves working with the car‘s AC and electrical parts. Advising you to DIY (Do It Yourself) will be a wrong idea as you might get the issue more complicated.

READ: How Many Gears Does A Semi Truck Have?

But be rest assured that you can drive your car if the climate control has gone bad. There’s no hazard in driving a car with failed climate control assembly. But you have to get it fixed as soon as possible due to weather controls.

Leave a Reply

Your email address will not be published.